1. Base coat with a white, let dry, then seal with clear coat, let dry
2. Mix up a burnt sienna glaze, then apply the glaze, brush it out, let dry. Use a small stiff brush with black and some white to flick on flyspecks , let dry, then clearcoat
click on pictures below to see a larger version
3. Mix a burnt umber glaze, make a cloth ball into a pad, dip the cloth into the glaze, use the edges of the pad to dab across the panel, leave a space, and follow the dabbing on top.
4. Mix a little burnt umber with white, use a small brush and add some lines in the finish to add furher interest to the finish. Clearcoat to protect and seal the project.
click on BACK arrow to return to previous page
